Order Online Contact Us

Products list

News list

News

Home > News >

How to maintain coarse hammer mill?

Time:2014-12-11 08:54    Author:clirik

 
We must pay attention to the maintenance and repairment of coarse hammer mill in daily use. so as to enable the coarse hammer mill to work properly and prolong its service life. The following is the maintenance method of coarse hammer mill:
 
1. Cleaning, fastening, adjusting and changing the oil, finished by the user departments.
 
2. Bearing parts are the most easily damaged parts, so they need regular maintenance, regular refueling in order to increase bearing life.
 
3. Transferred maintenance
 
4. Replacing lubricants for the season, fuel oil, antifreeze, increase the antifreeze facilities.
 
Coarse hammer mill mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper parts and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are ground regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.

Shanghai Clirik Machinery Co.,Ltd has manufacturing base and professional team. Welcome to visit our factory!
 
If any other questions of coarse hammer millPlease do not hesitate to contact us! or make an order:
 
E-mail: sales@clirik.com
 
Contact person: sunshine lan
 
Hotline: 0086-21-20236178
 
Address:  No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
 
 
 
Shanghai Clirik Machinery Co.,Ltd 2013-2016 all rights reserved.    Address:No.19Fuqing Rd,Shanghai SITEMAP