Therough hammer mill is normally used in the stone crushing industry.all the work principle of rough hammer mill is normally.how does the rough hammer mill work?

 

      Rough hammer mill mainly consists of frame,rotor,support iron and grate bars.the frane is divided into two parts:upper part and lower part which are welded by steel plates after being cut.liners is made of high manganese steels within the frame can be replaced after being worn out.the rotors consist of the turn plate,pin shafts, and the hammers which are grouped regularly in the main shaft.

 

      The motor drives the rotor to rotate fastly in the crushing cavity,and hammers spread outward as a result of centrifugal force from the rotation of the rotors.large materials entering the crusher through the feed inlet are stricken. Impacted.cut and group by the high-speed hammers to small size.Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. 

 

      If you have any questions about rough hammer mill,or have any questions.please do not hesitate to contact us.

 

      

E-mail:sales@clirik.com

      

Contact person:sunshine lan

      

Hotline:4008-168-355; 0086-21-20236178