The characteristics of ring hammer crusher

Time:2013-12-18 14:25    Author:clirik

Ring hammer crusher has the characteristics of simple structure, convenient to operate and maintain, and it sells well in the domestic and abroad and also high praised by users.
Ring hammer crusher crushes materials by the use of the collision between the high-speed rotating hammer body and material, it has the characteristics of simple structure, big crushing ratio, high production efficiency and so on. It can crush materials at dry, wet two forms. Ring hammer crusher is widely used to finely crush materials of medium hardness and special brittleness in mining, cement, coal, metallurgy, building materials, road and other industries.
Ring hammer crusher can adjust article labyrinth gap according to users' requirements and can also can change the grain-size to meet the different needs of different users.
The main application of the ring hammer crusher:
Ring hammer crusher is applied for crushing various materials with medium hardness and weak abrasiveness. The compressive strength of the material that was crushed by the ring hammer crusher is no more than 100 MPa, the moisture content of which is less than 15%. The generally crushed material include coal, salt, chalk, gypsum, bricks, limestone, etc. The ring hammer crusher is also used in crushing the broke wood of fiber structure, flexibility and strong tenacity, paper or broken asbestos, slags of cement for recycling of the asbestos fibres and so on.
In addition, hammer crusher can be used not only in crushing production line, it can also be used in the sand making production line. And can be used in dressing production line to take the place of cone crusher.The main working part of the ring hammer crusher is the hammer (also called hammer) rotor.The rotor disc is mainly composed by the spindle, pin shaft and a hamme. The motor is to drive the rotor cavity in broken high rotation speed. Materials enter into the machine from the mouth to the feeding,and then be blowed, impacted, sheared, abraded and shattered by the high-speed moving hammer.In the bottom of the rotor, there installed with a sieve plate. The crushing materials of a size less than that of the screen hole level will be discharged through the sieve plate, the size of which greater than that of the screen hole will still stay on the sieve plate to be farther crushed and grand by the hammer, finally through the sieve turned out.